360 Show Park

Anders Smitz

Start

1th station

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 76.1 - 139.7 mm
Ø 3 - 5.5"
Angular:
∟ 60 x 60 - 120 x 120 mm
∟ 2.4 x 2.4 - 4.7 x 4.7"
Box Beam:
□ 60 x 60 - 120 x 120 mm
□ 2.4 x 2.4 - 4.7 x 4.7"
Offset member
Circular:
Ø 60.3 - 76.1 mm
Ø 2.4 - 3"
With optional kit 2867-1:
Ø 88.9 - 114.3 mm
Ø 3.5 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 572 Nm
Load capacity: 250 kg (551 lb)
Minimum offset: 219 mm (8.6")
Maximum offset: 424 mm (16.7")

About the Product
Designed for mounting an offset member on a vertical parent member in a perpendicular or oblique direction. The hole pattern on the front clamp is designed to allow oblique installation on angular or square members. The bracket arm can be fixed at 45° or 60°, left or right.
Product Options
2867-1: U-bolt-kit for circular offset members Ø 88.9 - 114.3 mm (3.5 - 4.5")
Order Information
Please use this link for regional contact information, quoting article number 3611.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com

This product is IP-protected.  

3611 Vertical Tower Leg Offset

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 55 - 114.3 mm
Ø 2.2 - 4.5"
Angular:
∟ 60 x 60 - 80 x 80 mm
∟ 2.4 x 2.4 - 3.1 x 3.1"
Box Beam:
□ 50 x 50 - 80 x 80 mm
□ 2 x 2 - 3.1 x 3.1"
Performance
Load capacity single bracket: 40 kg (88.2 lb)
Load capacity bracket pair: 80 kg (176.4 lb)

About the Product
Bracket for attaching up to two standard or Heavy ERS units in either bookshelf or portrait position. Fasteners for attaching two units are included.
Product Options
91139: Bolt kit with four pieces M8 x 20 mm (0.8") stainless steel A4 with captive washers.
Order Information
Please use this link for regional contact information, quoting article number 6030.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com

This product is IP-protected.  

6030 Dual ERS Bracket

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 42.3 - 114.3 mm
Ø 1.7 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 462 Nm
Load capacity: 70 kg (154.3 lb)

About the Product
Designed to allow for radios to be mounted behind a panel antenna without any extra equipment pole.
Product Options
31154: Adaptor kit for equipment with c-c 150 mm (5.9") in the vertical plane.
Order Information
Please use this link for regional contact information, quoting article number 3117.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com

This product is IP-protected.  

3117 Antenna Offset

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 25 - 168.9 mm
Ø 1 - 6.6"
Angular:
∟ 40 x 40 - 120 x 120 mm
∟ 1.6 x 1.6 - 4.7 x 4.7"
Box Beam:
□ 40 x 40 - 120 x 120 mm
□ 1.6 x 1.6 - 4.7 x 4.7"
Offset member
Circular:
Ø 60.3 - 76.1 mm
Ø 2.4 - 3"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 698 Nm
Load capacity: 120 kg (265 lb)
Minimum offset: 195 mm (7.7")
Maximum offset: 420 mm (16.5")

About the Product
Designed to offset equipment from mast and/or tower leg.
Order Information
Please use this link for regional contact information, quoting article number 3263.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

3263 One-Direction Offset

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information

Parent member
Circular:
Ø 35 - 60.3 mm
Ø 1.4 - 2.4"
Offset member
Box Beam:
□ 50 x 50 - 60 x 60 mm
□ 2 x 2 - 2.4 x 2.4"
Performance
Load capacity per single joint: 100 kg (220 lb)
Minimum offset: 42.5 mm (1.7")
Maximum offset: 60 mm (2.4")

About the Product
Designed to provide perpendicular joints between solid or thick-walled circular and square members.
Order Information
Please use this link for regional contact information, quoting article number 5311.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

5311 Joint Plate Kit

How to order
https://www.mafigroup.com/how-to-order/

Technical Information
Parent member
Circular:
Ø 76.1 - 168.9 mm
Ø 3 - 6.6"
Offset member
Circular:
Ø 60.3 - 76.1 mm
Ø 2.4 - 3"
With optional kit 2867-1:
Ø 88.9 - 114.3 mm
Ø 3.5 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 698 Nm
Load capacity: 90 kg (198 lb)
Minimum offset: 217 mm (8.5")
Maximum offset: 422 mm (16.6")

About the Product
Designed to symmetrically offset two similar antennas from mast and/or tower leg.
Product Options
2867-1: U-bolt-kit for circular offset members Ø 88.9 - 114.3 mm (3.5 - 4.5")
Order Information
Please use this link for regional contact information, quoting article number 3268.

CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  


3268 Symmetric Offset

How to order
https://www.mafigroup.com/how-to-order/

Technical Information

Dimension
□ 60 x 60 mm (2.4 x 2.4")
Wall thickness 3 mm (0.12")
Length 1000 mm (39.4")

Material
S355J2H Hot-dipped galvanized


Order Information
Please use this link for regional contact information, quoting article number GB60603-XX.  

Galvanized Box Beams

Technical Information

Dimension
Ø 60.3 mm (2.4")
Wall thickness 2.9 mm (0.11")
Length 2000 mm (78.7")

Material
P235TR1 Hot-dipped galvanized

Order Information
Please use this link for regional contact information, quoting article number GT60329-XX.  


Galvanized Tubes

1th Station Products

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 60.3 mm
Ø 2.4"
Performance
Maximum overturning moment: 265 Nm
(With three concrete slabs)

About the Product
Designed as a free standing parent member for low wind-load generating equipment.
Easy installation and with tilt adjustable up to 6°.
Parent member 1000 mm (39.4") included.
Product Options
4207: Concrete slabs as ballast weight. (3 included)
Order Information
Please use this link for regional contact information, quoting article number 4112.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

4112 Free Stander Light

2nd Station

How to order:
https://www.mafigroup.com/how-to-%20order/

5040  Street Macro Wall & Pole Bracket W. Tilt

5050 SM 6701 Triple bracket

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 76.1 - 114.3 mm
Ø 3 - 4.5"
Offset member
Circular:
Ø 60.3 - 76.1 mm
Ø 2.4 - 3"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 462 Nm
Load capacity: 60 kg (132 lb)
Minimum offset: 264 mm (10.4")
Maximum offset: 286 mm (11.3")

https://www.youtube.com/watch?v=lExzvZBoT4k

About the Product
Designed to mount three large antennas with equal spacing between each offset member.
Order Information
Please use this link for regional contact information, quoting article number 4418.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

4418 3-Sector Antenna Mount

How to order:
https://www.mafigroup.com/products/

Technical Information
Parent member
Circular:
Ø 48.3 - 193 mm
Ø 1.9 - 7.6"
Angular:
∟ 40 x 40 - 120 x 120 mm
∟ 1.6 x 1.6 - 4.7 x 4.7"
Box Beam:
□ 40 x 40 - 120 x 120 mm
□ 1.6 x 1.6 - 4.7 x 4.7"
Offset member
Circular:
Ø 60.3 - 76.1 mm
Ø 2.4 - 3"
With optional kit 2867-1:
Ø 88.9 - 114.3 mm
Ø 3.5 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 1396 Nm
Load capacity: 60 kg (132 lb)
Minimum offset: 617 mm (24.3")
Maximum offset: 797 mm (31.4")

About the Product
Designed to offset equipment from mast and/or tower leg.
Product Options
2867-1: U-bolt-kit for circular offset members Ø 88.9 - 114.3 mm (3.5 - 4.5")
Order Information
Please use this link for regional contact information, quoting article number 3272.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

3272 One-Direction Offset

How to order:
https://www.mafigroup.com/products/

Technical Information
Parent member
Circular:
Ø 60.3 mm
Ø 2.4"
Performance
Maximum overturning moment: 265 Nm
(With three concrete slabs)

About the Product
Designed as a free standing parent member for low wind-load generating equipment.
Easy installation and with tilt adjustable up to 6°.
Parent member 1000 mm (39.4") included.
Product Options
4207: Concrete slabs as ballast weight. (3 included)
Order Information
Please use this link for regional contact information, quoting article number 4112.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Universal C-rail ≈ 41 mm (1.61")
Performance
Load capacity: 50 kg (110 lb)
Maximum horizontal force: 540 N

About the Product
Designed to carry a variety of radio brands attached to universal C-rail system. Key hole pattern on the bracket for easy installation.
Product Options
91139: Bolt kit with four pieces M8 x 20 mm (0.8") stainless steel A4 with captive washers.
Order Information
Please use this link for regional contact information, quoting article number 1242.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

1242 Universal Remote Radio Bracket

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 25 - 114.3 mm
Ø 1 - 4.5"
Angular:
∟ 40 x 40 - 80 x 80 mm
∟ 1.6 x 1.6 - 3.1 x 3.1"
Offset member
Circular:
Ø 48.3 - 114.3 mm
Ø 1.9 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 462 Nm
Load capacity: 250 kg (551 lb)
Minimum offset: 96 mm (3.8")
Maximum offset: 186 mm (7.3")

About the Product
Slim design to offset equipment from mast and/or tower leg.
Order Information
Please use this link for regional contact information, quoting article number 3274.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com

This product is IP-protected.  

3274 Universal Pole Mount

2nd Station Products

3rd Station

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Offset member
Circular:
Ø 60.3 - 114.3 mm
Ø 2.4 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 231 Nm
Load capacity: 100 kg (220 lb)
Minimum offset: 141 mm (5.6")
Maximum offset: 172 mm (6.8")

About the Product
Designed for mounting a circular offset member to a wall. This kit can be mounted either directly to brick or concrete walls, or using through-mounts with back-plates.
U-bolt kits to fit the whole range of offset members are included.
Order Information
Please use this link for regional contact information, quoting article number 3541.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  


3541 Medium Duty Wall Mount

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Offset member
Circular:
Ø 101.6 - 114.3 mm
Ø 4 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 924 Nm
Load capacity configuration 1: 500 kg (1102 lb)
Load capacity configuration 2: 240 kg (529 lb)
Minimum offset: 226 mm (8.9")
Maximum offset: 226 mm (8.9")

About the Product
Designed for mounting a circular offset member to a wall. This kit can be mounted either directly to brick or concrete walls, or using through-mounts with back-plates. Equipment can be mounted in two different configurations.
Order Information
Please use this link for regional contact information, quoting article number 2414.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

2414 Heavy Duty Wall Mount

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Offset member
Circular:
Ø 88.9 - 114.3 mm
Ø 3.5 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per bracket pair: 1848 Nm
Load capacity configuration 1: 650 kg (1433 lb)
Load capacity configuration 2: 500 kg (1102 lb)
Minimum offset: 120 mm (4.8")
Maximum offset: 350 mm (13.8")

About the Product
Designed to strengthen an existing wall mounted circular member that has been deemed unsuitable. Installation can be carried out while both existing member and equipment are left in place. The adjustable offset arm enables this solution to work with most existing wall mounted assemblies.
Order Information
Please use this link for regional contact information, quoting article number 2415.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com

This product is IP-protected.  

2415 Remedial Wall Bracket

3rd Station Products 

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Performance
Load capacity: 450 kg (992 lb)
Maximum equipment bolt dimension: M12

About the Product
Designed to work as adaptor beams between equipment and already existing structural beams on site without drilling or welding.
They can be mounted with clamps around the structural beams or with spacers and washers on the top flange when there is no space underneath the structural beams.
The hole pattern will fit a range of cabinets as well as MAFI 4316, circular member with foot solution.
Product Options
4316: Circular member with foot.
Order Information
Please use this link for regional contact information, quoting article number 3022.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

3022 Adaptor Beam Kit

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Performance
Load capacity: 450 kg (992 lb)
Maximum equipment bolt dimension: M12

About the Product
Designed as a free standing parent member for low wind-load generating equipment.
Easy installation and with tilt adjustable up to 6°.
Product Options
42071: Concrete slabs as ballast weight.
Order Information
Please use this link for regional contact information, quoting article number 4120.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com
This product is IP-protected.  

4120 Roof Butler

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 48.3 - 114.3 mm
Ø 1.9 - 4.5"

About the Product
Designed to fit any circular member up to Ø 114.3 mm (4.5"). Mount on a structural attachment point and use together with either adjustable struts MAFI 2230-2235 or rafter bracket MAFI 3510 for a parent member installation.
Product Options
42106: Protection mat.
Order Information
Please use this link for regional contact information, quoting article number 4328.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

4328 Support Foot

How to order
https://www.mafigroup.com/how-to-order/

Technical Information
Performance
Maximum overturning moment: 1720 Nm
Load capacity: 285 kg (628 lb)

About the Product
Designed as a circular parent member for any fitting bracket or equipment. This can be mounted on the platform MAFI 4310, or existing structural beams on site using the adaptor beams MAFI 3022. The foot solution allows tilt possibility up 6°.
Product Options
4310: Platform for free standing solution.
3022: Adaptor beam kit for existing structural beams.
Order Information
Please use this link for regional contact information, quoting article number 4316.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  


4316 Single Pole With Foot

How to order
https://www.mafigroup.com/how-to-order/

Technical Information
Parent member
Circular:
Ø 25 - 114.3 mm
Ø 1 - 4.5"
Angular:
∟ 40 x 40 - 80 x 80 mm
∟ 1.6 x 1.6 - 3.1 x 3.1"
Box Beam:
□ 40 x 40 - 80 x 80 mm
□ 1.6 x 1.6 - 3.1 x 3.1"
Performance
Load capacity: 3 x 35 kg (3 x 77 lb)

About the Product
Designed to provide a secure mounting solution for three radios, with or without PSU. Fits any equipment with horizontal c-c 146 mm (5.75").
Order Information
Please use this link for regional contact information, quoting article number 4019-3.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

4019-3 Triple RRU Mount

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 76.1 mm
Ø 3"
Wall thickness:
2.9 mm
0.1"
Performance
Maximum tilt: 6°
Maximum overturning moment (4 slabs): 1000 Nm
Maximum overturning moment (8 slabs): 1600 Nm

About the Product
Designed to carry equipment on places where a free standing structure is suitable. This kit includes a 1000 mm (39.4") parent member with Ø 76.1 mm (3"). Tilt adjustable up to 6°.
Product Options
42071: Concrete slabs as ballast weight.
Order Information
Please use this link for regional contact information, quoting article number 43091.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

43091 Free Stander Medium incl. Parent Member

How to order
https://www.mafigroup.com/how-to-order/

Technical Information
Parent member
Circular:
Ø 114.3 mm
Ø 4.5"
Performance
Load capacity per strut: 15 000 N

Adjustable length:
3000 - 3400 mm
118.1 - 133.9"

About the Product
Designed to provide flexible bracing to a circular member. This strut can be fitted as part of a new installation or retrofitted to an existing one.
Two structural attachment points for the strut feet are required. These points can be either vertical (wall) or horizontal (roof top) as the feet are tiltable.
Product Options
4328: Attachment foot for a circular parent member.
42106: Protection mat for 4328.
42105: Protection mat for 2235.
Order Information
Please use this link for regional contact information, quoting article number 2235.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

2235 Adjustable Strut

How to order
https://www.mafigroup.com/how-to-order/

Technical Information
Dimension
Ø 114.3 mm (4.5")
Wall thickness 3.6 mm (0.14")
Length 4000 mm (157.5")

Material
P235TR1 Hot-dipped galvanized

Order Information
Please use this link for regional contact information, quoting article number GT114336-40.  


4th Station Products

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Offset member
Circular:
Ø 60.3 - 114.3 mm
Ø 2.4 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 346 Nm
Load capacity: 100 kg (220 lb)
Minimum offset: 416 mm (16.4")
Maximum offset: 447 mm (17.6")

About the Product
Designed for mounting a circular offset member to a wall. This kit can be mounted either directly to brick or concrete walls, or using through-mounts with back-plates.
U-bolt kits to fit the whole range of offset members are included.
Order Information
Please use this link for regional contact information, quoting article number 3544.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

3544 Large Offset Wall Mount

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Rectangular wood, minimum:
120 x 45 mm
4.7 x 1.8"
Offset member
Circular:
Ø 60.3 - 114.3 mm
Ø 2.4 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Max. resisting torque per single bracket: 462 Nm
Load capacity: 300 kg (661 lb)

About the Product
Designed to be mounted directly on to wooden rafters or roof trusses to provide a circular equipment member solution.
Product Options
4328: Attachment foot for a circular parent member.
53001G: Rubber roof flashing Ø 80 - 160 mm (3.1 - 6.3")
53003G: Rubber roof flashing Ø 60 - 125 mm (2.4 - 4.9")
Order Information
Please use this link for regional contact information, quoting article number 3510.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

3510 Rafter Bracket Kit

5th Station

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Performance
Ultimate load capacity:

Uplift 125 N
Pull 750 N
Compressing 1625 N
Lateral 125 N

About the Product
Designed to be screwed to roof battens to allow for mounting of self supported solar panels on curved roof tiles.

Profiled to follow the shape of a curved roof tile to enable mounting without having to grind on, or to displace, the tiles. The bracket has a versatile equipment hole pattern and a feature for temporary support that enables easy installation. Fixing possibility for Ø20 mm electrical routing tube is intergrated in the bracket. The bracket is made from galvanized high strength steel.
Product Options
Rail and panel clamp are soon to be released.
Order Information
Please use this link for regional contact information, quoting article number 91167.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com

This product is IP-protected.  

91167 Roof Tile Bracket

6th Station

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 114.3 mm/ Ø 4.5"
Ø 76.1 mm/ Ø 3" (optional)
Performance
Maximum tilt: 4°
Maximum overturning moment: 9790 Nm
(With full ballast 896 kg (1975 lb))

About the Product
This freestanding structure delivers robust rooftop equipment-pole(s) without the need to penetrate weatherproofing layers. Adjustable ballast- carrying cross beams enable the use of different sizes of concrete paving slabs depending on availability. The pole(s) can be kept vertical even when the surface is sloping up to 4°. The default pole size is Ø114.3 (4.5in) (Designer to confirm length and section), but you can also specify Ø76.1 (3in) by using the product option U-bolt 2801-1. The poles can be folded flat, facilitating both installation and maintenance.
Product Options
42071: Concrete slabs as ballast weight. Half ballast: 16 pcs, full ballast: 32 pcs. Maximum ballast weight: 896 kg (1975 lb).

91124: Additional strut for yoke arms to be attached to Ø 76.1 mm (3") pole.

2801-1: U-bolt kit to fit Ø 76.1 mm (3") pole.
Order Information
Please use this link for regional contact information, quoting article number 4612.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

4612 Free Stander 2 platforms 4x4

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Angular:
∟ 60 x 60 - 120 x 120 mm
∟ 2.4 x 2.4 - 4.7 x 4.7"

Circular:
Ø 76 - 169 mm
Ø 3 - 6.7"
Offset member
Circular:
Ø 60 - 76 mm
Ø 2.4 - 3"

With optional kit for 3278:
Ø 88.9 - 114.3 mm
Ø 3.5 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Maximum side force/bracket: 4000 N
Load capacity 3278: 150 kg (330.69 lb)
Maximum offset: 596 mm (23.46")

About the Product
Designed to provide support for two heavy antennas offset symmetrically from a central parent pole. The double parent pole clamp eliminates rotational slip even if the bracket is asymmetrically loaded.
Product Options
2867-1: The hole pattern for 3278 is also suitable for option U-bolt kit 2867-1. This enables offset members to range up to 114.3 mm (4.5").
Order Information
Please use this link for regional contact information, quoting article number 3278.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  


3278 Symmetrical Offset Double Clamp

7th Station

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Angular:
∟ 60 x 60 - 120 x 120 mm
∟ 2.4 x 2.4 - 4.7 x 4.7"

Circular:
Ø 76 - 169 mm
Ø 3 - 6.7"
Offset member
Circular:
Ø 60 - 76 mm
Ø 2.4 - 3"

With optional kit for 3278:
Ø 88.9 - 114.3 mm
Ø 3.5 - 4.5"
Performance
Ultimate transient man-load: 2.4 kN
Maximum side force/bracket: 4000 N
Load capacity 3278: 150 kg (330.69 lb)
Maximum offset: 596 mm (23.46")

About the Product
Designed to provide support for two heavy antennas offset symmetrically from a central parent pole. The double parent pole clamp eliminates rotational slip even if the bracket is asymmetrically loaded.
Product Options
2867-1: The hole pattern for 3278 is also suitable for option U-bolt kit 2867-1. This enables offset members to range up to 114.3 mm (4.5").
Order Information
Please use this link for regional contact information, quoting article number 3278.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com  

Between 6-7th station

How to order:
https://www.mafigroup.com/how-to-%20order/

Technical Information
Parent member
Circular:
Ø 76.1 mm
Ø 3"
With optional kit 91125:
Ø 114.3 mm
Ø 4.5"
Performance
Maximum tilt: 4°
Maximum overturning moment: 9790 Nm
(With full ballast 896 kg (1975 lb))

About the Product
Designed to support a circular parent member with Ø 76.1 mm (3") in the corner of the platform using ballast as counter weight. Optional clamp set MAFI 91125 makes it possible to mount a circular member with Ø 114.3 mm (4.5").
Optional kit MAFI 91110 allows a second circular member with Ø 76.1 mm (3") to be mounted in the opposite corner. Maximum recommended length is 1500 mm (59.1").
Product Options
42071: Concrete slabs as ballast weight.
91124: Additional strut for yoke arms. Fit Ø 76.1 mm (3")
91125: Clamp set for Ø 114.3 mm (4.5").
91110: Kit for adding an extra circular member in opposite corner.
Order Information
Please use this link for regional contact information, quoting article number 4602.
CAD-Block
To request CAD-Block for this kit, please e-mail
design@mafigroup.com
This product is IP-protected.  